An overheating laptop throttles your CPU to protect itself, cutting performance by 30–70% in sustained workloads. It also degrades the battery and shortens the lifespan of every component in the chassis. The good news: most overheating problems have simple causes and cheap fixes. Here is how to diagnose and solve them systematically.
What changed in 2026
- Intel Core Ultra and AMD Ryzen 8000 series laptops run hotter by default. Manufacturers ship them with aggressive power targets to hit benchmark scores; undervolting and power limits are often the correct fix out of the box.
- Thermal interface materials improved — Conductonaut Extreme and Thermal Grizzly Kryonaut Extreme are the 2026 standard repaste materials for thin-and-light laptops.
- ThrottleStop and Ryzen Controller matured with better profiles and safer defaults for undervolting without BIOS unlocking.
- Laptop cooling pads with active vacuum extraction became common — they actively pull hot air from the laptop exhaust rather than just blowing at the base.
Diagnosing the cause
Before fixing anything, measure. Download HWiNFO64 (Windows) or iStatMenus (Mac) and watch temps under load.
| Temperature range |
Verdict |
| Under 80°C under full load |
Normal — cooling is fine |
| 80–90°C sustained |
Borderline — clean vents, consider cooling pad |
| 90–95°C sustained |
Thermal throttling likely — repaste + undervolt needed |
| 95°C+ or hitting TjMax |
Critical — clean, repaste, check fan operation immediately |
Check the task manager for CPU-pegging processes — sometimes "overheating" is just a runaway Chrome tab.
Fix 1: Clean the vents (free, 10 minutes)
- Power off and unplug the laptop.
- Hold a can of compressed air 2–3 cm from the exhaust vents. Short bursts — do not tilt the can.
- Work along all exhaust vents and intake grilles (usually bottom and sides).
- If you have a Phillips screwdriver: remove the bottom panel, blow out the fan and heatsink fins directly. A cotton swab can dislodge compacted dust plugs.
- Reassemble, boot, and recheck temps.
This single step fixes the majority of overheating complaints.
Fix 2: Cooling pad
Place the laptop on a cooling pad with the intake side over the fans. Good 2026 options draw ~$25–60. Look for:
- Fans that align with your laptop's intake position (bottom-center or corners)
- Vacuum exhaust models if your laptop has rear exhaust
- USB-powered with adjustable fan speed
Expect a 3–10°C drop at idle, slightly less under peak load.
Fix 3: Undervolt the CPU
Undervolting reduces voltage (and heat) without reducing clock speeds. On most laptops you can undervolt by 50–100 mV with zero performance loss.
Windows (Intel): Use ThrottleStop — set a negative voltage offset in the FIVR menu. Start at -50 mV, test stability, increase in 25 mV steps.
Windows (AMD Ryzen): Use Ryzen Controller or Smokeless UMAF — set a negative core voltage offset. Start at -20 mV.
macOS (Apple Silicon): Apple Silicon does not support manual undervolting — Apple manages it in firmware. Instead, reduce the Power Mode (System Settings → Battery → Power Mode: Low Power).
Typical temp reduction from undervolting: 5–20°C under sustained load.
Fix 4: Repaste the CPU/GPU
If your laptop is 2+ years old and cleaning + undervolting did not resolve the issue, the thermal paste has likely dried out.
What you need: thermal paste (~$8–15 for Thermal Grizzly Kryonaut), a Phillips screwdriver set, and an hour.
- Remove the bottom panel.
- Remove the heatsink screws in the order specified (usually numbered 1–4 on the heatsink).
- Clean old paste from CPU die and heatsink with isopropyl alcohol (90%+) and a lint-free cloth.
- Apply a pea-sized amount to the center of the CPU die. Do not spread manually — pressure distributes it.
- Reseat the heatsink, tighten screws in numbered order to avoid cracking the die.
- Reassemble, test.
Typical result: 10–25°C reduction under load on a 3-year-old laptop.
Fix 5: Power limit reduction
Some laptops ship with higher-than-needed power limits (PL1/PL2). Use ThrottleStop or Intel XTU to reduce PL1 to 15–25 W on an ultrabook, or Ryzen Controller for AMD. This trades 5–10% peak performance for 15–20°C lower temps and longer sustained performance (fewer throttle drops).
Common mistakes
Using compressed air upright. Tilting the can sprays propellant liquid, which damages components. Keep it vertical.
Skipping the software diagnosis. A mining malware or runaway browser tab causes the same symptoms as clogged vents. Check Task Manager first.
Applying too much thermal paste. More is not better. A pea-sized amount in the center. Excess paste spills onto the PCB and can short circuits.
Undervolting too aggressively. Large undervolt steps cause BSODs. Move in 10–25 mV increments and stress test before using daily.
Blocking the exhaust further. Placing a book or soft surface under the laptop on the exhaust side is worse than no stand at all.
What to skip
- "Cooling gel pads" that stick to the bottom — they conduct heat to the desk but block the intake fans.
- Laptop vacuum coolers that attach to the exhaust if your laptop has bottom intake — they reverse the designed airflow.
- Liquid metal on laptops with aluminum heat spreaders — liquid metal corrodes aluminum and causes permanent damage. Use it only on copper or nickel-plated surfaces.
FAQ
How do I check my laptop temperature?
HWiNFO64 (free, Windows) shows per-core temps in real time. Aim for under 85°C under sustained load.
Is 90°C normal for a gaming laptop?
Unfortunately, yes for thin gaming laptops at full GPU load. But sustained 95°C+ indicates a cooling problem — repaste and undervolt.
Will repasting void my warranty?
On most brands, yes. However, a laptop throttling at 95°C is already hardware-damaged in slow motion. Weigh the tradeoff.
Can I fix an overheating Mac?
Clean the vents, reset SMC (Intel Macs), and set Power Mode to Low Power in macOS. Apple Silicon Macs manage thermals tightly; sustained high temps usually mean a background process is misbehaving.
Where to go next
See How to improve laptop battery life in 2026, How to check CPU temperature in 2026, and Best laptop cooling pads in 2026.